Waller · Concrete Cutting
Concrete Cutting in Waller, TX
Waller sits in Waller County where US-290 meets FM 362 northwest of Houston, a small town seeing new industrial and residential growth along the 290 corridor. We route slab sawing, core drilling and selective demolition to vetted crews here.
Services We Provide
Concrete Cutting Services in Waller, TX
Our crews serve Waller across every concrete cutting and demolition discipline. Select a service below to learn more or request a quote.
Service
Concrete Cutting Services in Waller, TX
A complete guide to concrete cutting, sawing, coring and scanning methods — and how to pick the right one for your Houston slab, wall, or structural job.
Learn moreService
Slab Sawing (Flat Sawing) in Waller, TX
Walk-behind slab sawing for floors, driveways, bridge decks and pavement — clean straight cuts to prep for removal, replacement, or new penetrations.
Learn moreService
Wall Sawing in Waller, TX
Track-mounted wall sawing for precise openings in vertical and inclined concrete — doorways, windows, HVAC penetrations and elevator shafts.
Learn moreService
Concrete Core Drilling in Waller, TX
Diamond core drilling for clean round holes — plumbing, conduit, HVAC line sets, anchors, dowels and material sampling — in slabs, walls and foundations.
Learn moreService
Wire Sawing in Waller, TX
Diamond wire sawing for thick, heavily reinforced, or oddly shaped concrete — bridge piers, mass foundations and structural removals no blade can reach.
Learn moreService
Trench Cutting in Waller, TX
Straight, parallel saw cuts that define clean trench edges in slabs and pavement for plumbing, electrical, and drainage runs before removal.
Learn moreService
Hand Sawing in Waller, TX
Portable ring, chain and hand-held saws for cuts in tight, confined, or detail conditions where walk-behind and track equipment cannot reach.
Learn moreService
Joint Sawing in Waller, TX
Cutting control and contraction joints into fresh-to-green slabs so shrinkage cracking happens along planned lines — timed to the concrete's set.
Learn moreService
Concrete Scanning (GPR) in Waller, TX
Ground-penetrating radar scanning to locate rebar, post-tension tendons and embedded conduit before cutting or coring — so crews never cut blind.
Learn moreConcrete cutting on the US-290 corridor
Waller straddles the Waller-Harris county line where US-290 meets FM 362, northwest of Houston toward Hempstead. Historically a rural, agricultural community, it has drawn new industrial and manufacturing investment — including large-scale plants along the 290 corridor — while retaining its small-town residential base.
Crews we route work to handle industrial and manufacturing slab work, agricultural equipment pads, and residential and small-commercial cutting across the growing corridor.
Common Waller projects
Industrial and manufacturing work drives equipment-pad cutting, anchor coring and slab coring for utilities. Agricultural sites add equipment pads and trenching. Residential and small-commercial work brings slab doorways, plumbing cores and flatwork removal.
- Equipment-pad and machine-base cutting for manufacturing
- Anchor and dowel coring for equipment installs
- Slab coring and utility trenching
- Residential slab doorways and plumbing cores
- Flatwork and driveway removal
Soil, jurisdiction and dust control
Waller County's prairie clay makes post-tensioned and reinforced slabs common, so GPR scanning precedes cutting. The city spans the Waller-Harris county line, so jurisdiction depends on the site, and it is incorporated with its own permitting. Wet-cutting keeps respirable silica under OSHA 29 CFR 1926.1153 controlled in occupied manufacturing space.
OSHA silica standard
Concrete cutting produces respirable crystalline silica regulated under OSHA 29 CFR 1926.1153; crews default to wet-cutting or vacuum dust collection.
Waller concrete cutting FAQ
- Do you do manufacturing and industrial concrete work in Waller?
- Yes. Equipment-pad cutting, machine-base cutting and anchor coring are common for the new manufacturing plants along the US-290 corridor.
- Which county is my Waller project in?
- The city of Waller straddles the Waller-Harris county line, so jurisdiction depends on the specific address.
- Why scan a Waller slab before coring?
- Prairie clay makes post-tensioned and reinforced slabs common; GPR scanning maps reinforcement so cores and cuts avoid it.
Explore related resources
Ready to scope your concrete cutting project?
Send drawings, photos, or a short description and get matched with a qualified Houston crew. No obligation, no invented quotes.