Industry
Concrete Cutting for Industrial & Manufacturing Plants in Houston
Machine-base cutting, trenching and heavy slab work for plants and production floors — planned around production windows, thick slabs and live utilities.
Manufacturing and industrial floors are built for load, not for easy cutting. Slabs are thick, heavily reinforced and often crossed by embedded conduit, process piping and grounding grids. When a line is reconfigured or a new machine lands, the concrete work has to happen in a narrow production window without disturbing the equipment that keeps running next to it.
Machine relocations and line reconfiguration
Most plant cutting is driven by equipment: removing an old machine base, cutting a new pad, coring for utility drops, or trenching for process lines and drains. Slab thickness on production floors often runs well beyond typical commercial slabs, so slab and wire sawing are used where standard depths fall short. Crews confirm reinforcement and embedded services before cutting.
- Machine-base removal and new equipment-pad cuts
- Trench cutting for process piping, conduit and drains
- Core drilling for utility drops and floor penetrations
- Wire sawing for oversized or heavily reinforced sections
Cutting inside a running plant
Live utilities and rotating equipment make lockout/tagout coordination and utility locating essential. Crews scan before cutting, coordinate with plant maintenance on isolation, and plan slurry containment so process areas stay clean and dry.
- GPR and utility locating before any cut
- Coordination with plant lockout/tagout procedures
- Slurry containment to protect process and clean areas
Services for plants and production floors
Machine Base Cutting
Remove old bases and cut new equipment footings.
Learn moreSlab Sawing
Thick production-floor slabs cut to line.
Learn moreWire Sawing
Oversized and heavily reinforced sections.
Learn moreTrench Cutting
Process piping, conduit and drainage trenches.
Learn moreEquipment Pad Cutting
Openings and pads for new machinery.
Learn moreConcrete Core Drilling
Utility drops and floor penetrations.
Learn moreProduction windows are tight
Plant shutdowns and changeovers are expensive. Share the available window and the scope can be sequenced — often across a weekend or planned outage — so the line is back before production resumes.
Frequently asked questions
- Can cutting be done during a scheduled shutdown?
- Yes. Machine-base removal, pad cutting and trenching are commonly staged into planned outages, changeovers or weekend windows so production downtime is minimized.
- How thick a slab can be cut?
- Slab sawing handles typical production-floor thicknesses, and wire sawing is available for oversized or heavily reinforced sections where standard blade depths fall short. Depths are confirmed during scoping.
- How are embedded utilities handled?
- Crews scan with GPR and coordinate utility locating before cutting, and work with plant maintenance on lockout/tagout so live conduit, piping and grounding are isolated or avoided.
- How is dust controlled around clean or process areas?
- Wet or vacuum-integrated cutting controls respirable silica under OSHA 1926.1153, and slurry is contained to keep process, clean and adjacent production areas dry.
Explore related resources
Ready to scope your concrete cutting project?
Send drawings, photos, or a short description and get matched with a qualified Houston crew. No obligation, no invented quotes.