Industry
Concrete Cutting for Warehouse & Distribution in Houston
Dock cuts, trench drains and heavy slab sawing for warehouses and distribution centers — large flat slabs, forklift traffic and racking coordination.
Warehouses and distribution centers are acres of flat slab designed for forklift and racking loads. Cutting here tends to be large-format: new dock positions, trench drains across a floor, equipment pads for conveyors and automation, and slab removals where racking or operations change. The challenge is doing it without shutting the whole building down.
Docks, drains and floor reconfiguration
Loading-dock modifications require cutting and removing slab and dock walls to add positions or levelers. Trench and floor drains run long, straight saw-cuts across the slab. Automation and conveyor upgrades need equipment pads and core penetrations. Because these slabs are thick and often reinforced for load, slab and wire sawing carry the heavy work.
- Loading-dock cuts, extensions and leveler openings
- Long trench-drain and floor-drain runs across the slab
- Equipment pads for conveyors, racking and automation
- Selective slab removal for layout changes
Phase the work around operations
Distribution buildings rarely close, so cutting is phased by zone or scheduled into slower shifts. Crews barricade the active cut, contain slurry and keep aisles clear so material handling continues around the work.
- Zone-by-zone phasing to keep the building running
- Barricading and slurry control in active aisles
- Heavy slab and wire sawing for thick, reinforced floors
Services for distribution facilities
Loading Dock Cutting
New dock positions, extensions and levelers.
Learn moreLoading Dock Removal
Remove and rebuild dock walls and aprons.
Learn moreTrench Drain Installation
Long drain runs across warehouse floors.
Learn moreSlab Sawing
Heavy floor cuts for reconfiguration.
Learn moreEquipment Pad Cutting
Pads for conveyors and automation.
Learn moreSlab Removal
Controlled removal for layout changes.
Learn moreBig floors, tight windows
Share the operating schedule and the work can be broken into phases so material handling continues around the cut. Long drain and dock scopes are ideal for weekend or off-shift sequencing.
Frequently asked questions
- Can you cut without closing the whole warehouse?
- Yes. Work is phased by zone or scheduled into slower shifts, with the active cut barricaded and slurry contained so material handling continues elsewhere in the building.
- Do you handle loading-dock modifications?
- Yes. Dock positions, extensions and leveler openings can be cut, and existing dock walls and aprons removed and prepared for rebuild.
- How are long trench-drain runs cut?
- Slab sawing produces straight, controlled cuts along the drain layout, sequenced to keep aisles usable during the work.
- Can thick reinforced floors be cut?
- Yes. Slab sawing handles typical warehouse slab depths, and wire sawing is available for oversized or heavily reinforced sections.
Explore related resources
Ready to scope your concrete cutting project?
Send drawings, photos, or a short description and get matched with a qualified Houston crew. No obligation, no invented quotes.