Industry
Concrete Cutting for Oil, Gas & Petrochemical Facilities in Houston
Hot-work and confined-space-aware cutting for refineries, plants and terminals — foundation work, containment cuts and strict permit-to-work coordination.
Along the Houston Ship Channel and across the region's petrochemical corridor, concrete cutting happens inside some of the most safety-regulated environments in industry. Refineries, chemical plants and terminals layer hot-work permits, confined-space entry, gas testing and permit-to-work systems on top of the cutting itself. The work is heavy — equipment foundations, containment structures, pipe-rack footings — but the permitting governs the pace.
Hot work, confined space and permit-to-work
Cutting in a live process unit is classified work. Any spark-producing activity may require a hot-work permit and fire watch, and much of the work — pits, trenches, vaults — is confined-space entry with atmospheric monitoring. Wet-cutting is used both for silica control and to reduce ignition risk. Crews integrate with the site's permit-to-work and safe-work-permit systems rather than operating around them.
- Equipment-foundation and machine-base cutting and removal
- Containment-structure and dike cutting
- Pipe-rack and support footing modifications
- Trench and vault cutting for process and utility lines
Cutting inside the permit system
Crews work to the facility's safe-work permits, hot-work procedures and confined-space program. Wet methods control silica and reduce sparks, and structural and foundation removal is planned to avoid over-demolition in congested units.
- Hot-work permit and fire-watch coordination
- Confined-space entry with atmospheric monitoring
- Wet-cutting for silica and ignition control
Services for process facilities
Machine Base Cutting
Equipment foundation cuts and removals.
Learn moreStructural Concrete Removal
Controlled heavy-structure removal.
Learn moreWire Sawing
Massive reinforced foundations.
Learn moreFoundation Removal
Old equipment foundation demolition.
Learn moreTrench Cutting
Process and utility line trenches.
Learn moreConcrete Core Drilling
Anchor and pipe penetrations.
Learn morePermit-to-work governs everything
In a live process unit, no cut happens outside the facility's permit-to-work system. Hot-work permits, gas testing, fire watch and confined-space procedures are built into the scope from the start.
Frequently asked questions
- Can crews work under a facility's permit-to-work system?
- Yes. Cutting integrates with the site's safe-work permits, hot-work procedures, gas testing and confined-space program rather than operating outside them.
- How is ignition risk controlled?
- Wet-cutting is used to control both respirable silica under OSHA 1926.1153 and spark generation, with hot-work permits and fire watch coordinated where required.
- Do you remove old equipment foundations?
- Yes. Machine bases and equipment foundations are cut and removed, with wire sawing for massive reinforced sections in congested units.
- Is confined-space cutting supported?
- Yes. Pit, trench and vault cutting is treated as permit-required confined space with atmospheric monitoring and entry procedures coordinated with the facility.
Explore related resources
Ready to scope your concrete cutting project?
Send drawings, photos, or a short description and get matched with a qualified Houston crew. No obligation, no invented quotes.