Harris · Concrete Cutting
Concrete Cutting in Crosby, TX
Crosby is an unincorporated community in northeast Harris County along US-90 and FM 2100 near the San Jacinto River, mixing rural residential with Ship Channel-adjacent industry. We route slab sawing, core drilling and selective demolition to vetted crews here.
Services We Provide
Concrete Cutting Services in Crosby, TX
Our crews serve Crosby across every concrete cutting and demolition discipline. Select a service below to learn more or request a quote.
Service
Concrete Cutting Services in Crosby, TX
A complete guide to concrete cutting, sawing, coring and scanning methods — and how to pick the right one for your Houston slab, wall, or structural job.
Learn moreService
Slab Sawing (Flat Sawing) in Crosby, TX
Walk-behind slab sawing for floors, driveways, bridge decks and pavement — clean straight cuts to prep for removal, replacement, or new penetrations.
Learn moreService
Wall Sawing in Crosby, TX
Track-mounted wall sawing for precise openings in vertical and inclined concrete — doorways, windows, HVAC penetrations and elevator shafts.
Learn moreService
Concrete Core Drilling in Crosby, TX
Diamond core drilling for clean round holes — plumbing, conduit, HVAC line sets, anchors, dowels and material sampling — in slabs, walls and foundations.
Learn moreService
Wire Sawing in Crosby, TX
Diamond wire sawing for thick, heavily reinforced, or oddly shaped concrete — bridge piers, mass foundations and structural removals no blade can reach.
Learn moreService
Trench Cutting in Crosby, TX
Straight, parallel saw cuts that define clean trench edges in slabs and pavement for plumbing, electrical, and drainage runs before removal.
Learn moreService
Hand Sawing in Crosby, TX
Portable ring, chain and hand-held saws for cuts in tight, confined, or detail conditions where walk-behind and track equipment cannot reach.
Learn moreService
Joint Sawing in Crosby, TX
Cutting control and contraction joints into fresh-to-green slabs so shrinkage cracking happens along planned lines — timed to the concrete's set.
Learn moreService
Concrete Scanning (GPR) in Crosby, TX
Ground-penetrating radar scanning to locate rebar, post-tension tendons and embedded conduit before cutting or coring — so crews never cut blind.
Learn moreConcrete cutting northeast of the Ship Channel
Crosby is an unincorporated community in northeast Harris County along US-90 and FM 2100, near the San Jacinto River and the upper reaches of the Houston Ship Channel industrial belt. It blends rural and semi-rural residential neighborhoods with chemical and industrial facilities, giving it a workload that spans everyday remodels and heavier industrial cutting.
Crews we route work to handle industrial anchor coring and wire sawing, rural residential and metal-building slab work, and commercial cutting along the US-90 corridor.
Common Crosby projects
Industrial work drives anchor coring, wire sawing and equipment-pad cutting. Rural residential and metal-building work brings slab cutting and doorways. Commercial and agricultural sites add trenching and slab coring.
- Anchor-bolt coring and wire sawing for industrial facilities
- Slab cutting and doorways for rural homes and metal buildings
- Equipment-pad cutting for industrial and agricultural sites
- Utility trench cutting and slab coring
- Flatwork and driveway removal
Flooding, soil and jurisdiction
Near the San Jacinto River, Crosby carries flood exposure that drives drainage cutting. Coastal clay makes post-tensioned and reinforced slabs common, so GPR scanning precedes cutting. As unincorporated territory, projects follow Harris County requirements, and industrial sites add facility safety protocols. Wet-cutting keeps respirable silica under OSHA 29 CFR 1926.1153 controlled.
OSHA silica standard
Concrete cutting produces respirable crystalline silica regulated under OSHA 29 CFR 1926.1153; crews default to wet-cutting or vacuum dust collection.
Crosby concrete cutting FAQ
- Do you do industrial concrete work in Crosby?
- Yes. Crews handle anchor coring, wire sawing and equipment-pad cutting for the chemical and industrial facilities in the Crosby area under facility safety protocols.
- Is Crosby inside a city for permits?
- No. Crosby is unincorporated, so permits and right-of-way coordination generally run through Harris County.
- Why scan a Crosby slab before coring?
- Coastal clay makes post-tensioned and reinforced slabs common; GPR scanning maps reinforcement so cores avoid it.
Explore related resources
Ready to scope your concrete cutting project?
Send drawings, photos, or a short description and get matched with a qualified Houston crew. No obligation, no invented quotes.